Download Print this page
LiteHawk BULLET Instruction Manual

LiteHawk BULLET Instruction Manual

4wd

Advertisement

Quick Links

14+
100% Factory Assembled, Tested and Ready To Run!
Litehawk Videos! Tech Support! Replacement Parts! Just a Mouse Click Away!
PLEASE DO NOT RETURN THIS PRODUCT TO ANY RETAIL STORE.
For any questions or problems with this product please call us at 1-800-268-5797
or visit our website www.litehawk.ca
Made for and distributed by Borgfeldt (Canada) Limited 50 Konrad Cres., Markham, ON L3R 8T4
R
www.litehawk.ca

Advertisement

loading

Summary of Contents for LiteHawk BULLET

  • Page 1 100% Factory Assembled, Tested and Ready To Run! Litehawk Videos! Tech Support! Replacement Parts! Just a Mouse Click Away! PLEASE DO NOT RETURN THIS PRODUCT TO ANY RETAIL STORE. For any questions or problems with this product please call us at 1-800-268-5797 or visit our website www.litehawk.ca...
  • Page 2 - New AA alkaline batteries are recommended for use in the controller to obtain maximum performance. - Your charger is tailor made for the Li-Po battery used in your LiteHawk BULLET. Do not use it to charge any battery other than that in the LiteHawk BULLET.
  • Page 3 Before we get ready for your first driving adventure, let’s cover the basics together! BULLET is a scaled down version of an Off Road Racer - it will speed across all types of terrain and thrill with big slides! The chassis is designed with 4-wheel independent suspension, 4WD and oil filled shocks that soak up bumps.
  • Page 4 LiteHawk BULLET - Battery & Charger Your LiteHawk BULLET comes with an 7.4Volt Li-Po battery, a 120V wall mount power supply and balance charging system. Battery: The rechargeable Li-Po battery provides the power to propel your model at high speeds.
  • Page 5: During Charging

    - Do not store the battery plugged into the charger. Installation of battery into the BULLET: Place your BULLET on a clean flat surface. Avoid areas where small parts may be lost. The battery is housed in the battery compartment located on the left side of the chassis.
  • Page 6: Before You Drive

    LiteHawk BULLET - After Use Care 1. When you have finished using your LiteHawk BULLET you should first turn OFF the model, then disconnect the Li-Po battery. Then switch OFF the transmitter.
  • Page 7: Care And Maintenance

    LiteHawk BULLET - Storage - Remove all batteries before storing your vehicle. - Never store your LiteHawk BULLET near open flames, in high temperatures (including radiators) or in direct sunlight. Ideally, place the model in a warm dry location. - Care must be taken when handling rechargeable batteries to avoid the possibility of injury and/or damage to property.
  • Page 8 No worries! We pride ourselves on the very best customer service! We have all the parts you’ll ever need to keep your new LiteHawk in tip top shape! Like we always say, “accidents happen, even to the best of us”..with that in mind www.lite- hawk.ca is available 24 hours a day, 7 days a week! Our technical personnel are just a...