D-Link AC3150 User Manual page 91

Section 4 - Configuration
In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technol-
ogy that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
6 to 4 Address:
Displays the 6 to 4 address.
6 to 4 Relay:
Enter the 6 to 4 relay supplied by your ISP.
Primary DNS Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Enter the LAN (local) IPv6 address for the router.
Address:
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Enable Check to enable the Automatic IPv6 Address Assignment feature.
Automatic
IPv6 Address
Assignment:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Auto
Configuration DHCPv6
Type:
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-885L User Manual
6 to 4
87