Bosch Exxcel 1400 Express Instruction Manual page 47

Water connection
Water supply
To prevent leaks or water damage, it is essential to
follow the instructions in this chapter!
Caution
Operate the washing machine with cold drinking wa
ter only. Do not connect the appliance to the mixer
tap of an unpressurized hot water boiler.
If in any doubt, have the water connection carried out
by an authorized technician.
The water supply hose must not be:
- Bent or squashed.
- Modified or cut through (stability can no longer be
Plastic threads must only be tightened by hand. Do
not remove the strainers from the water supply hose.
Observe the water pressure in the supply network:
- The water pressure should be between 1 and
- A pressure reducing valve must be installed if the
Connect the water supply hose.
q to the rear panel of the washing machine and ...
q to the tap.
q Subsequent to connection:
min. 10 mm
guaranteed).
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
maximum water pressure is exceeded.
Turn on the water tap completely, and check
connection points for water tightness.
47