Do you have a question about the PSAT2 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for LSS PSAT2
Page 1
PROFESSIONAL AUDIO SYSTEM PSAT2 OPERATING MANUAL Ver. PSAT2-EN-1.1 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
Page 2
Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions.
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC.
It is possible to have powering mode Bi-Amp operation using internal crossover filter, for more information ask to LSS technical services. The PSAT2 was designed to support the widest possible range of pro audio applications. It’s high output capabilities let it acts as a main system for concert or even provide front or side fill for concert touring applications.
Multiple flying tracks allow to choice the position and inclination of suspended speaker. Use plugs suitable to support the weight of the entire apparatus. Fixing Points Side Flying Tracks Rear Flying Tracks Side Handles Rear Flying Tracks Side Flying Tracks 8| Operating Manual ver. PSAT2-EN-1.1...
Page 9
Minimum 4 Ohms 3.5 Ohms 2 Ohms 1.8 Ohms NL4 Pin Configuration Mixer Caution: Do not exceed the Pins 1+ and 1- Used maximum load rating of Pins 2+ and 2- Not Used the amplifier. Operating Manual ver. PSAT2-EN-1.1 |9...
Page 10
PSAT2________________________________________________________________________________ In the PSAT2 both the LF and HF drivers are connected to pins 1+/1– of the NL4 connector. Channel 2 has been linked from In to the out. You can now use the system 10| Operating Manual ver. PSAT2-EN-1.1...
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities.
Poor system hissing, grounding or ground Check and correct the system grounding, as required. humming loop If these suggestions do not solve your problem, contact your nearest LSS dealer or LSS distributor. 12| Operating Manual ver. PSAT2-EN-1.1...
Need help?
Do you have a question about the PSAT2 and is the answer not in the manual?
Questions and answers