Philips PET724 Service Manual page 8

4.0 MECHNICAL INSTRUCTIONS
1. Back View as Fig.1
Remove screws to remove base
Fig.1
2. Disconnect key control wire and 20 pins harness,
Remove screws to dismentle the plate,
Soldered short pattern for laser diode as Fig.2
Fig.2
Remove DVD driver and main board as Fig.3,4
3.
Disconnect DVD driver and main board
Fig.3
Remove DVD driver and main board
Fig.4
20 pins harness
key control wire
soldered
4. Remove key board and other parts as Fig.5
Fig.5
5. Remove top cover as Fig.6
Fig.6
6. Disconnect speakers and IF board
Remove IF board as Fig.7.
Fig.7
7. Remove TFT shield, HV board and
LCD TFT as Fig.8,9.
Fig.8
Fig.9