Replacement of burner injector and adjustment of INSTALLATION INSTRUCTIONS burner air flow (Fig. 4) • Remove the front panel. • Unscrew the existing injector "U" and replace it with the CONFORMITY TO REGULATIONS AND LAWS one indicated in Table T1 in Appendix. The appliance is to be installed by an authorised person in •...
• Main burner Repairs should only be carried out by authorised service • Brazier centres. • Pilot burner For service and spares parts, please contact Comcater 1800 • Thermocouple 810 161. • Ignition electrode The manufacture declines any responsibility if these •...
Page 5
Appendix TECHNICAL DATA NATURAL T1 - INJIECTOR OREFICES SIZES PROPANE MAIN 2.70 1.60 PILOT MARKING 0.85 1.00 TURN DOWN SCREW 1 Turn close Fully in From fully out NATURAL T2 - BURNER AERATION SHUTTERS SETTING PROPANE NATURAL T3 - NOMINAL GAS CONSUMPTION PROPANE GL9-4G MJ/h...
Need help?
Do you have a question about the GL9-.G and is the answer not in the manual?
Questions and answers