Table of Contents
Advertisement
Mode and click Best Power, Best Picture, Standard or Off.
3 - Press BACK repeatedly if necessary, to close the menu.
Perfect Contrast
With Perfect Contrast, you can set the level at which the TV
automatically enhances the details in the dark, middle and light
areas of the picture.
To adjust the level...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Contrast > Perfect
Contrast and click Maximum, Medium, Minimum or Off.
3 - Press BACK repeatedly if necessary, to close the menu.
Brightness
With Brightness, you can set the level of brightness of the
picture signal. Brightness is a setting intended for expert users.
We recommend non-expert users to adjust the brightness of
the picture with the Contrast setting.
To adjust the level...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Contrast > Brightness and click
inside the slider bar to adjust the value.
3 - Press BACK repeatedly if necessary, to close the menu.
Video Contrast
With Video Contrast, you can decrease the range of the video
contrast. If you are watching 3D pictures, this setting is switched
to 3D Video Contrast. Video Contrast and 3D Video Contrast
are settings intended for expert users.
To adjust the level...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Contrast > Video
Contrast and click inside the slider bar to adjust the value.
3 - Press BACK repeatedly if necessary, to close the menu.
Light Sensor
The Light Sensor adjusts the picture and Ambilight settings
automatically to the lighting conditions of the room. You can
switch Light Sensor on or off.
To switch on or off...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Contrast > Light Sensor and
click On or Off.
3 - Press BACK repeatedly if necessary, to close the menu.
Gamma
With Gamma, you can set a non-linear setting for picture
luminance and contrast. Gamma is a setting intended for expert
users.
To adjust the level...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Contrast > Gamma and click
inside the slider bar to adjust the value.
3 - Press BACK repeatedly if necessary, to close the menu.
Sharpness
Ultra Resolution
With Ultra Resolution, you switch on a superior sharpness in
line edges and contours.
To switch on or off...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Sharpness > Ultra Resolution.
3 - Click On or Off.
4 - Press BACK repeatedly if necessary, to close the menu.
Noise Reduction
With Noise Reduction, you can filter out and reduce the level
of image noise.
To adjust the noise reduction...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Sharpness > Noise Reduction.
3 - Click Maximum, Medium, Minimum or Off.
4 - Press BACK repeatedly if necessary, to close the menu.
MPEG Artefact Reduction
With MPEG Artefact Reduction, you can smoothen the digital
transitions in the picture. MPEG artefacts are mostly visible as
small blocks or jagged edges in images.
To reduce the MPEG artefacts...
1 - Press and press (left) Setup.
2 - Click Picture > Advanced > Sharpness > MPEG Artefact
Reduction.
3 - Click Maximum, Medium, Minimum or Off.
4 - Press BACK repeatedly if necessary, to close the menu.
Motion
72
Advertisement
Table of Contents
