Installing The I/O Shield - Gigabyte GA-X99-Gaming 5P User Manual

Rear Speaker Out
Use this audio jack to connect rear speakers in a 5.1-channel audio configuration.
Headphone/Speaker Out Jack
This audio output jack supports audio amplifying function. For better sound quality, it is recommended that
you connect your headphone/speaker to this jack.
Refer to the instructions on setting up a 2/5.1-channel audio configuration in Chapter 6, "Configuring
2/5.1-Channel Audio."
Wi-Fi Antenna Connector Holes
Secure the antenna connectors, washers, and nuts onto the holes.
1-8

Installing the I/O Shield

For how to turn on/off the I/O shield LED indicators, refer to the instructions on in Chapter 2, "BIOS
Setup," "Peripherals," or Chapter 5, "Unique Features," "APP Center\Ambient LED."
Hardware Installation
Step 1:
Install the included I/O shield into the chassis. (For actual installation,
please refer to the user guide for your chassis.)
Step 2:
Place the motherboard into the chassis, aligning the back panel
connectors with the installed I/O shield. Connect the power cable
from the I/O shield to the LED_CON1 connector on the motherboard.
- 22 -