Attaching And Removing The Connection Terminal Cover - Panasonic TC-22LT1 Operating Instructions Manual

Attaching and removing the connection terminal cover

Attach the connection terminal cover after all cables are connected to the terminals on
the back of the set.
Attaching the cables
Fix the cables in place using clampers 1, 2, 3, and 4.
Hold the top of the clamper with your thumb and pull out with your index
finger to release the hook.
Attaching
1. Insert the two ribs at the top of
the cover into the holes on the set.
Removing
1. Press the left and right rib with locking function of the
cover as shown in the diagram, and pull out.
34
2. From this position, push the lower
part of the cover into the set.
2. Remove the cable cover by holding on to the lock
on the center of the right and left sides.
3. Snap the ribs on the lower right
and left of the cover into the set.