Panasonic TH-L37X2S Operating Instructions Manual page 23

Menu Item
Mode
Bass
Treble
Equalizer
Balance
Headphone
Volume
Surround
Volume
Correction
Speaker
Distance
to Wall
MPX
HDMI1 / 2 / 3
Input
Reset to Defaults
TH-L37X2S&20KMRTX_EN.indd 23 TH-L37X2S&20KMRTX_EN.indd 23
Adjustments / Configurations (alternatives)
Basic sound mode (Music / Speech / User)
●
The selected mode affects all input signals.
Music : Improves sound quality for watching music video, etc.
Speech : Improves sound quality for watching news, drama, etc.
●
In Music and Speech mode, you can adjust "Bass" and
"Treble" settings, and those settings will be stored for each
mode.
User : Adjusts the sounds manually by using the equalizer to suit your
favourite sound quality.
●
For the User mode, "Equalizer" will appear on the Sound
Menu instead of "Bass" and "Treble". Select the "Equalizer"
and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound
output
Increases or decreases level to enhance or minimise sharper, higher
sound output
Adjusts the frequency level to suit your favourite sound quality
●
Select the frequency and change the frequency level by using the
cursor button.
●
If you want to enhance the bass sound, raise the level of the lower
frequency. If you want to enhance the treble sound, raise the level of the
higher frequency.
●
To reset the levels of each frequency to the default settings, select
the "Reset to Defaults" by using cursor button, and then press the OK
button.
Adjusts the volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio)
V-Audio : Provides a dynamic enhancer of width to simulate improved
spatial effects
●
Switching is also possible by the Surround button on the remote control
(p. 10).
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●
If the back space between the TV and wall is over 30 cm, "Over 30cm"
is recommended.
●
If the back space between the TV and wall is within 30 cm, "Up to
30cm" is recommended.
Selects multiplex sound mode (if available) (p. 41)
●
Normally : Stereo
●
Stereo signal cannot be received: Mono
●
M1 / M2 : Available while mono signal is transmitted
Select to fit the input signal (Digital / Analogue) (p. 42).
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
●
HDMI input mode only
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
"Equalizer" (below)
3/18/2010 5:27:17 PM 3/18/2010 5:27:17 PM
23