7: Performing The Initial Set-Up - Sony KDL-55W954A Operating Instructions Manual

Except KDL-55/46W954A,
KDL-55/46W950A
TV
~
• For LAN connections, use a Category 7 cable
(not supplied).
• Be sure to remove the rear cover before
connecting to LAN terminal (KDL-55/46W954A,
KDL-55/46W950A only).
Preparing a wireless LAN
The built-in wireless LAN device allows you to
access the Internet and your home network.
With this feature, you can connect to a wireless
LAN and enjoy the benefits of networking in a
cable-free environment. Before setting up the
wireless LAN function of the TV, be sure to set
up a wireless LAN router.
TV
Internet
Modem
with router
functions
or
Router
Modem
Internet
Wireless
router
Modem
Internet
7: Performing the
initial set-up
1
Connect the TV to your AC power outlet
(mains socket).
2
Press =/1 on the TV. The illumination LED
will light up in white.
When you switch on the TV for the first time,
the Language menu appears on the screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimisation before you can perform the
initial setup. There will be no picture and
sound, and the illumination LED on the front
of the TV blinks white for about 40 seconds.
Do not turn off the TV during this process.
This process has been completed at the
factory for some TVs.
• The illumination LED lights up in different
colours according to the status of the TV. If
you do not wish to light up the illumination
LED, you can turn it off later. Press HOME,
then select "Settings" t "System Settings"
t "General Set-up" t "Illumination LED" t
"Off". You can also press OPTIONS, then
select "Illumination LED" t "Off".
(Continued) 15
GB