Remote Commander And Control Panel Keys - Sony VPL-SW630C Operating Instructions Manual

Remote Commander and Control Panel Keys

Remote Commander
4
INPUT
2
MENU
3
RETURN
ASPECT KEYSTONE
4
D ZOOM
Control Panel Keys
1 2
a Turning on the power/Going to
standby mode
?/1 (On/Standby) key
b Selecting an input signal
(page 14)
INPUT key
c Operating a menu (page 20)
MENU key
RESET key
ENTER /V/v/B/b (arrow) keys
RETURN key
6
Location and Function of Controls
7
1
APA ECO MODE
6
RESET
ENTER
PATTERN
BLANK
5
VOLUME FREEZE MUTING
3 6
d Adjusting the image (page 16)
ASPECT key (page 22)
KEYSTONE key (page 18)
PATTERN key (page 18)
APA (Auto Pixel Alignment) key
(page 18)
Note
*
Use this key when inputting a computer
signal via the RGB input connector
(INPUT A or INPUT B).
e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you want to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
BLANK key
Cuts off the projected image
temporarily. Press again to restore the
previous image. Picture muting helps
reduce power consumption.
MUTING key
Mutes the audio output temporarily.
Press again to restore the previous
volume.
VOLUME +/– key
Adjusts the volume output.
*2
FREEZE key
Pauses a projected image. Press again to
restore the image.
*
*1