Solving General Printing Problems - Samsung ML-2550 User Manual

Solving General Printing Problems

For problems with the operation of your printer, refer to the table
for suggested solutions.
Problem Possible Cause
The printer does The printer is not
not print. receiving power.
The printer is not
selected as the default
printer.
Check the printer for
the following:
The printer may be in
manual feed mode and
out of paper.
The connection cable
between the computer
and the printer is not
connected properly.
The connection cable
between the computer
and the printer is
defective.
The port setting is
incorrect.
The printer may be
configured incorrectly.
Solution
Check the power cord connections. Check
the power switch and the power source.
Select Samsung ML-2550 Series or
Samsung ML-2550 Series PS as your
default printer.
• The printer cover is not closed.
• Paper is jammed.
• No paper is loaded.
• The toner cartridge is not installed.
If a printer system error occurs, contact
your service representative.
Check the display message, add paper to
the Multi-Purpose Tray and press the
On Line/Continue button on the printer's
control panel.
Disconnect the printer cable and reconnect
it.
If possible, attach the cable to another
computer that is working properly and print
a job. You can also try using a different
printer cable.
Check the Windows printer setting to make
sure that the print job is sent to the correct
port, for example, LPT1. If the computer
has more than one port, make sure that the
printer is attached to the correct one.
Check the printer properties to ensure that
all of the print settings are correct.
S
OLVING
7
P 7.3
ROBLEMS