Atomic Clock ......6 FCC Information ....10 Set the Time & Date ....6 Customer Support ....11 Placement Guidelines ..... 7 Warranty......11 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits FRONT OF CLOCK 1. SNOOZE Button/ Momentary Backlight INDOOR 2. Alarm #1 ON/OFF Switch 3. Alarm #1 Setup Button & Buttons for setup preferences. 5. Alarm #2 Setup Button 6. Alarm #2 ON/OFF Switch BACK OF CLOCK +/—...
Page 4
Features & Benefits INDOOR 1. Date 6. Alarm #2 Time 2. Atomic Clock 7. Alarm #2 Days Active Sets itself to the correct time and Indicates alarm set for EVERY DAY, automatically updates for Daylight WEEKDAYS, or WEEKENDS. Saving Time. 8.
Clock Setup Plug in Power Adapter Install or Replace Backup Batteries For the best performance, plug in the power adapter as the main 1. Remove the battery power source for this product. compartment cover. 2. Insert 3 x AA alkaline batteries into the battery compartment, as shown.
Atomic Clock (RCC) AcuRite atomic clocks use a radio-controlled signal (RCC) to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy.
Alarm Clock Placement Place alarm clock in a dry area free of dirt and dust. To help INDOOR ensure an accurate indoor temperature measurement, be sure to place the clock away from heat sources or vents. Important Placement Guidelines • To ensure accurate temperature measurement, place out of direct sunlight and away from any heat sources or vents.
OPERATION Using the Clock Set the Alarm Time Slide Alarm #1 and/or Alarm #2 switch ON (alarm time cannot be adjusted if the alarm is OFF). Press and release the “ ” or the “ ” button to enter ALARM SET MODE.
(see page 7). For additional troubleshooting, please visit: Atomic signal or time syncing problems http://www.nist.gov/pml/div688/grp40/radioclocks.cfm If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Clock Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Specifications 32ºF to 122ºF, 0ºC to 50ºC TEMPERATURE RANGE 5v power adapter POWER...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.