Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual page 24

Using the control ring/control dial
■
To change the settings assigned to the control ring/control dial
Changes the settings assigned to the control ring/control dial.
Press [MENU/SET]
Press
Press
Press
[MENU/SET]
Press
The following settings can be assigned
• [Default Control]
• [Exposure Comp.]
• [White Balance]
Press [Q.MENU/ ] button several times
●
The assigned function setting applies to all the recording modes. However,
the assigned function may not operate when combined with certain
recording mode.
■
Using Quick menu
During recording, you can easily call some of the menu items and set them.
Press [Q.MENU/ ] button
Press
• The menu items and setting items that are displayed differ depending on
the recording mode.
Turn the control ring or control dial to change the setting
Press [MENU/SET]
24
VQT5E66 (ENG)
to select [Setup] menu and press [MENU/SET]
to select [Ring/Dial Set] and press [MENU/SET]
to select [ ] (control ring) or [
to select the setting and press [MENU/SET]
• [Zoom]
• [Aspect Ratio]
• [Not Set] (control ring only)
to select menu items
] (control dial), and then press
• [Step Zoom]
• [Sensitivity]