Mode Functions - Cobra CXT545 C Owner's Manual

Mode Functions

Operation
Set DCS Privacy Codes
Mode/Power
To select a DCS privacy code:
1. After selecting a channel, press the Mode/Power
button until the DCS icon appears and the small
numbers flash on the display (01 through 83).
DCS Privacy Code
If CTCSS is turned on at the channel
selected, the display will flash the DCS
icon and "OFF." To switch from CTCSS to
DCS, press the Channel Up or Channel
Down button while the display is flashing
Channel Button
HI / LO
"OFF." The display will then show the
small numbers flashing and you will then
be able to proceed to step 2.
2. Press using the Channel Up or Channel Down button to select a DCS
privacy code. You can hold the Up or Down button for fast advance.
3. When DCS privacy code is displayed, choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press Talk or Call/Lock button to return to Standby mode.
c. Do not press any buttons for 6 seconds to return to Standby mode.
8
CXT545C_MANL_ENG_GIANT.indd 8-9
Introduction Operation
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
To turn VOX mode on or off:
Mode/Power
1. Press the Mode/Power button until the VOX icon
2. Press the Channel Up or Channel Down
VOX Icon
3. Choose one of the following:
HI / LO
Channel Button
To set VOX sensitivity:
1. Press the Mode/Power button until the VOX icon
Mode/Power
VOX Sensitivity Level
2. Press the Channel Up or Channel Down
3. Choose one of the following:
Channel Button
HI / LO
Customer Assistance Warranty
® radio can be used "hands-free," automatically
flashes on the display. The current On or Off
setting is displayed.
button to turn VOX On or Off.
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
flashes and the current sensitivity level is displayed.
The current VOX sensitivity level is displayed
with letters "L" and a Number 1 through 5,
with Number 5 being the most sensitive level
and Number 1 being the least sensitive level.
button to change the setting.
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
Nothing Comes Close to a Cobra
•
®
9
3/4/15 1:17 PM