Troubleshooting - Fluid 8000511 User Manual

7" dual screen, with touch screen controls
Table of Contents

Advertisement

TROUBlEShOOTING

Carry out the problem-solving measures described in the
following section before contacting a repair technician.
Turn off the DVD player immediately as soon as you suspect a
malfunction. Unplug the power plug and check if DVD player is
unusually warm or if smoke is rising from it.
PROBlEM
POSSIBlE CAUSE
The DVD player
Disc cover not closed
does not work
No disc inserted
Disc inserted the wrong
way
Disc dirty or deformed
Regional code of the
player does not match the
regional code of the DVD
Moisture on lens
No audio
Device not properly
connected
Headphones connected
(loudspeaker off)
DVD sound settings
incorrect
Disc dirty or deformed
REMEDY
Close disc cover
Insert disc
Insert disc with label
facing up
Clean disc, or insert
other disc
Purchase DVD with
corresponding regional
code
Remove disc and turn off
DVD player for at least
two hours
Check connections and
connect device in the
correct way
Pull out the headphones
Check sound settings and
set sound correctly
Clean disc, or insert
other disc
10
PROBlEM
POSSIBlE CAUSE
No video
TV screen is off or in the
incorrect video mode
Device not properly
connected
Poor video and/
Disc dirty or deformed
or audio quality
Repeated
Loop mode is switched on
playback of a
section
Disc dirty or deformed
Remote control
Obstacle between remote
does not work
control and DVD player
Remote control not
pointed at DVD player
Remote control battery
inserted the wrong way
Battery too low or
completely discharged
Other possible causes for problems:
Static discharges or other external interferences can cause
the DVD player to malfunction.
When this happens, disconnect the power plug from the
power outlet and plug it back in.
If the problem persists, disconnect the device from the power
supply again and contact a repair centre.
REMEDY
Turn on LCD screen and/or
set correct video mode
Check connections and
connect device in the
correct way
Clean disc, or insert
other disc
Exit the loop mode
Clean disc, or insert
other disc
Remove obstacle
Point remote control
directly at DVD player
Check the battery's polarity
and, if necessary, insert
battery correctly
Insert new battery

Advertisement

Table of Contents
loading

Table of Contents