Bios Utility; Boot Sequence; Setting Passwords - Acer Aspire Switch 12 User Manual

44 - BIOS utility

The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you
do not normally need to run this utility. However, if you encounter
configuration problems, you may need to run it.
To activate the BIOS utility, press <Fn> + <2> during the POST while
the computer logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility,
then select Boot from the categories listed at the top of the screen.

Setting passwords

To set a password on boot, activate the BIOS utility, then select
Security from the categories listed at the top of the screen. Find
Password on boot: and use the <Fn> + <5> and <Fn> + <6> keys to
enable this feature.
B I O S
U T I L I T Y