Optical Drive Extension Board - HP ProBook 470 G1 Maintenance And Service Manual

Optical drive extension board

Description

Optical drive extension board

Before removing the optical drive extension board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service door (see
b. Hard drive (see
c. Optical drive (see
d. WLAN/Bluetooth module (see
e. Keyboard (see
f. Top cover (see
g. System board (see
Remove the optical drive extension board:
Pull the optical drive extension board straight away from the side of the system board.
▲
Reverse this procedure to install the optical drive extension board.
Battery on page 34).
Service door on page
Hard drive on page 36)
Optical drive on page
WLAN/Bluetooth combo card on page
Keyboard on page 45)
Top cover on page 47)
System board on page
35).
39)
60)
Component replacement procedures
Spare part number
723675-001
43)
65