Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Toshiba MV13P2 Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 4 screws 1.
1.
Remove the AC cord from the AC cord hook 2.
2.
3. Remove the Back Cabinet in the direction of arrow.
1
1
1
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1. Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2. Disconnect the following connectors:
(CP801 and CP851B).
3. Remove the CRT PCB in the direction of arrow.
Front Cabinet

DISASSEMBLY INSTRUCTIONS

Front Cabinet
2
Back Cabinet
Fig. 1-1
CRT PCB
Fig. 1-2
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2. Disconnect the following connectors:
(CP352, CP401 and CP502).
Unlock the support 2.
3.
4. Remove the TV/VCR Block in the direction of arrow.
Front Cabinet
1-4: DECK CHASSIS AND SYSCON PCB
(Refer to Fig. 1-4)
Remove the 2 screws 1.
1.
Remove the screw 2.
2.
3. Remove the Deck Shield Plate in direction of arrow (A).
Remove the 3 screws 3.
4.
5. Disconnect the following connectors:
(CP1001, CP4001, CP4002 and CP4003).
6. Remove the Deck Chassis in the direction of arrow (B).
Remove the screw 4.
7.
8. Remove the Syscon PCB in the direction of arrow (C).
B1-1
1
1
2
UP TO
RELEASE
TV/VCR Block
1
2
1
Deck Shield Plate
3 3
(A)
3
Deck Chassis
(B)
Syscon PCB
4
(C)
Deck Holder
Fig. 1-3
Fig. 1-4