Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.).
Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the CUSHION(12) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M6x1x13mm)(33).
STEP 2
Push the BUTTON PIN(9) in and insert the ARMPIT PAD SUPPORT(7) into the SWING ARM(6). Slide
an ARMPIT PAD(8) on the ARMPIT PAD SUPPORT(7). Repeat on other side.
NOTE: There are three adjustment holes in the bottom of the SWING ARM(6) which allow the ARMPIT
PAD SUPPORTS(7) to be attached in three different positions. Start with the center position and
adjust if necessary.
Button Pin(9)
Bottom View
7
Advertisement
Table of Contents
