If The Appliance Is Not Operating Correctly; Before Calling For Service - Haier HRZ-186S/U User Instructions

If the appliance is not operating correctly:

Please check the following points.
Is there a power failure? (Check by turning on a house light)
Has the fuse blown or has the circuit breaker tripped.
Has the door been closed correctly?
Check the thermostat has been set correctly.
Check the mains plug is seated in the wall socket correctly and the socket switch is on.
Check the power outlet is working, Try another appliance.
Is the room temperature too cold or too hot. ( working temperature range 16 to 32
If the appliance is not used for a prolonged period
If the refrigerator is not in use for a long period of time, proceed as follows:
Disconnect the refrigerator from the main supply by removing the plug from the socket.
Clean and dry the inside as instructed under the heading of cleaning the appliance.
Leave the door open to prevent any unpleasant smells from building up while the
appliance is not in use.

Before calling for service

Please check the following points:
1. The refrigerator is noisy when running
Check the appliance is level and is not in contact with another appliance or kitchen
furniture.
2. The refrigerator does not cool sufficiently.
If the door has been opened too often, or it has been left open for a while it will take
time for the appliance to reach its set temperature.
Check the air flow around the refrigerator has not been reduced due to insufficient
clearance.
NOTE: The following characteristics should not be looked upon as a problem.
A gentle trickling sound caused by coolant flowing through the pipe.
Compressor operating at high temperature.
9
)