Table of Contents
Advertisement
Profiles
(M 7)
Tone sound and vibration set can be customised for
each profile according to your environment.
There are 6 profiles including one user definable
profile: Normal, Meeting, Activity, Car, Headset and
Silent.
Activating a Profile
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding icon
described on page 15 is displayed on the standby
screen.
Normal:
This is the default setup (not
displayed in the standby screen).
Meeting:
For use when discretion needed.
Activity:
For use in busy environments.
Car:
For use in the car (connected to a
handsfree car kit).
Headset:
For use with a headset (connected
via Bluetooth).
Silent:
For use when silence is needed. All
sounds are muted and you are
alerted to calls with the vibrator.
Tip
• Press and hold R during standby to display the
Profiles selection screen.
Customising Profiles
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select the setting you wish to customise and change
as desired.
For details about settings, pages 88 to 91.
4.
Press [Save] when finished.
Resetting Profile Settings
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code, then select [Yes].
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 110.
Profiles
87
Advertisement
Table of Contents
