Lenovo C360 Hardware Maintenance Manual page 35

Step 6. Push the optical drive pin downward to push out the optical drive as shown.
Step 7. Remove the optical disk drive bracket as shown:（插入图纸）
Step 8. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 9. Remove the 2 screws that secure the optical drive to the metal bracket.
Step 10. Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk. 2 3
1 2
1
.
Chapter 7 Replacing hardware
29