ATTACH THE FRONT FENDER
❶ Place the front fender on the frame and over the front
wheel. Figure 3.5
❷ Align the mounting holes with the holes in the frame.
Note: There are six posts with mounting holes on the
underside of the bumper. DO NOT use the bottom set
of holes.
❸ Insert the screws through the holes in the frame and tighten
the front fender to the frame. Be sure the front wheel does
not rub against the front fender.
1
ATTACH THE PARENT TRAY
Unstable items (such as: hot fluids, tall bottles, metal
containers) placed in the parent tray may tip over and
seriously injure the passenger. Always remove items that
may tip over before using the stroller.
❶ Align the slots in the parent tray with the slot on the parent
tray support tube. Figure 3.6
❷ Lower the tray onto the pegs and snap into place.
3
Figure 3.5
WARNING!
1
2
1
Figure 3.6
8