Table of Contents
Advertisement
Lenovo ideapad 2in1 14 Hardware Maintenance Manual
1140 Camera board, sensor board and EDP cable
For access, remove these FRUs in order:
• "1010 Base cover" on page 31
• "1020 Battery pack" on page 33
• "1030 Solid state disk" on page 34
• "1040 Hard disk drive" on page 35
• "1050 PCI Express Mini Card for wireless LAN" on page 36
• "1060 Speakers" on page 38
• "1080 Fan and Heat Sink assembly" on page 41
• "1090 IO board" on page 44
• "1100 System board" on page 46
• "1110 Upper case" on page 48
• "1130 LCD unit" on page 51
Figure 14. Removal steps of camera board, sensor board and EDP cable
Peel off the tape that secures the camera board
. Unplug the connector in
1
the direction shown by arrow
.
2
When installing: Make sure that the connector is attached firmly.
54
Advertisement
Table of Contents
