Page 1
HAV-R100G HAV-R200G HAV-R300G HAV-R100G HAV-R200G HAV-R300G To prevent damage or injury, be sure to read and understand these User’s Manual before assembling or using your IGO Audio HOME THEATRE RACK SYSTEM. Please keep these instructions handy for future reference. 650-AVR300-01...
Page 2
For customers in the United CAUTION You are cautioned that any changes or modifications not States expressly approved in this manual could void your authority to operate this equipment. Important Safety Instructions NOTE: 1. Read these instructions. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 2.
Turning off the sound temporarily (Muting) ....20 Selecting BASS level during playback ....... 21 Thank you for purchasing an IGO Audio HOME THEATRE RACK SYSTEM. Explanation of marks used in these instructions Explanation of marks used in these instructions Describes additional explanations on functions, references and restrictions.
Getting Started Supplied Accessories The following accessories are supplied with your IGO Audio HOME THEATRE RACK SYSTEM. Please make sure that these accessories are included in the package. If you wish to use a pin cable or an optical cable other than those supplied, purchase a commercially-available cable suitable for the location, jack type and usage environment of the unit.
Safety Precautions Important precautions are provided on the product and in these operating instructions to prevent potential personal injury to users and other people as well as damage to property, and to ensure the safe and proper use of the product. Understand the indications, marks and symbols fully before reading the rest of the instructions.
Page 6
On installation Install this unit where the power plug is easily accessible in case of unforeseen problems or breakdown or when you are not going to use the unit for a long time. Do not install this unit in a place subject to water splashes such as the bathroom or outdoors.
Page 7
Prolonged use of the unit with overweight objects placed on it may cause injury or damage to the unit. For both HAV-R100G, HAV-R200G and HAV-R300G, the weight limits for the objects to be placed on each board. Refer to Specifications Do not place any objects other than a TV on the top board.
Page 8
Do not pull the power cord to disconnect the power plug. Pulling the power cord to disconnect the power plug from the wall outlet may cause damage to the power cord or plug, resulting in fire or electrical shock. Grasp the power plug to disconnect it. Avoid plugging or unplugging the power plug with wet hands.
Page 9
On cleaning Disconnect the power plug from the wall outlet before cleaning the unit. Failure to observe this caution may cause electric shock. Do not use benzene or alcohol. Do not use any volatile solvents such as benzene or alcohol. Use of such substances may cause the cabinet to deteriorate or damage the surface finishing.
Notes and Precautions on Use Licenses and Trademarks On operation Be careful that some parts of this unit may become hot during use. If you move the unit to a remote place (e.g. moving SRS and the symbol are trademarks of SRS Labs, house) cover it with an object such as a blanket to avoid Inc.
About this Unit The illustrations below show HAV-R300G. The visual appearance of HAV-R100G and HAV-R200G is slightly different from the illustrations. Front view Center speaker (for HAV-R300G only) • Functioning when surround mode is ON. Front speaker (left) Control panel (see below)
Page 12
Rear view Topple-prevention screw hole • Use this hole to secure the TV stand to the unit to prevent toppling. Amplifier connections (see below) Subwoofer (left) Subwoofer (right) Amplifier connections Amplifier connections The amplifier is fixed to the rack. Do not attempt to remove it. Power cord •...
Page 13
Display panel Input indicator • Indicates the selected input. Information display • Displays the information on the status. • The information display will disappear if you do not press any operation button within five seconds. Remote control Buttons on the remote control and their key functions are as described below (some buttons may have different functions from ordinary operations).
(Refer to “Connecting a TV and Player” on connecting the equipment.) Place the TV in the center of the unit. Compatible equipment Compatible equipment HAV-R100G/HAV-R200G HAV-R300G Be sure to place the TV in Be sure to place the TV in the center of the top board the center of the top board of the unit.
Page 15
TV stand to the rear, and use the locking screw (supplied) to securely fasten it to the topple-prevention screw hole on the back of the unit. For HAV-R100G/HAV-R200G only TV stand screw (not supplied) TV stand screw (not supplied) Topple-prevention belt...
Before connecting external equipment, be sure to turn them off and unplug the power cord of the equipment. When you wish to add any equipment, turn off and unplug the IGO Audio HOME THEATRE RACK SYSTEM as well as the equipment being installed before proceeding.
When using HDMI cable or Pin cable When using HDMI cable or Pin cable (Refer to the operating instructions of the connected equipment for set up.) Player HDMI cable Pin cable (not supplied) (not supplied) Refer to TV connection. • The optical cable may be damaged if it is bent excessively. •...
Connecting the Power Cord Preparing the Remote Control Be sure to connect the power cord only after all Inserting batteries into the remote the connections have been done. control Use two R03 or LR03 (size AAA) batteries. Two R03 (size AAA) batteries are supplied with the unit. Remove the cover and insert the batteries.
Turning on the Power About the remote control’s operating range After connecting your external equipment, turn on the Point the remote control at the remote sensor on the power of the unit. unit. Avoid exposing the remote sensor to intense light. The Turning on the power Turning on the power remote control may not function under such a condition.
Functions Listening to the Sound Selecting the input source Select the input source. Selecting the input source with the INPUT SELECTOR button on the front panel. Select the input source by pressing button repeatedly. The input source changes in the following order: (Actual change of the input source may be slower than the display.) Input sequence Display panel...
Selecting BASS level during playback You can select one of the four BASS levels. Select the desired BASS level by pressing button repeatedly. BASS level is displayed on the front display panel. BASS level Display panel BASS 0 (Flat) BASS 1 (Low boost: Default) BASS 2 (High boost)
Find Solution according to Troubleshooting the Symptoms Check the Following First Use this troubleshooting guide to check possible Check the power plug connection. Check the power plug connection. solutions for symptoms such as improper functioning of Insert the power plug into the wall outlet securely. the theatre rack.
Operation The power does not turn on The power does not turn on Check if: Possible Solution/Other Page The power plug is disconnected. • Connect the power plug to the wall outlet. Unable to operate the unit with the remote control Unable to operate the unit with the remote control Check if: Possible Solution/Other...
Others Glossary PCM is a format to covert an analog sound signal into a digital signal. It encodes analog signals into digital format and involves no compression process. The signal converted by this method is called PCM signal and used for music CDs and DVDs.
Specifications Type IGO HOME THEATRE RACK SYSTEM Model HAV-R100G HAV-R200G HAV-R300G AC power source AC 110V - 240V 50/60Hz 28 W 32 W Power consumption Standby mode: 0.5 W Standby mode: 0.5 W 39 7/16" × 16" × 23 47 5/16" × 16" × 23 55 3/16"...
Need help?
Do you have a question about the HAV-R100G and is the answer not in the manual?
Questions and answers