Front Panel Controls - Cambridge Audio Azur 640H User Manual

Front panel controls

1
Standby / On
Standby / On
1
Switches the unit between Standby mode (indicated by dim power LED)
and on (indicated by bright power LED). The unit should be left in
standby mode when not in use, particularly if the unit is to perform
background compression or if serving content to other playback devices.
Press and hold for 5 seconds to fully turn the unit off. If the unit is not
going to be used for an extended period of time, it should also be turned
off at the rear panel.
Open / Close
2
Opens and closes the disc tray allowing you to load a disc. Pressing Play
will also close the tray and start the disc.
Infrared sensor
3
Receives IR commands from the supplied Azur remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
Play / Pause
4
Plays the disc, selected album/track or internet radio station. Press to
pause if currently playing.
Stop
5
Stops the CD, selected album/track or internet radio station currently
playing.
Skip < >
6
Allows for skipping between tracks. Press the left button to skip
backwards by one track, the right button to skip forwards by one track.
Record
7
Allows for ripping of CDs to the hard drive of the 640H.
2 3 4 5 6
Open / Close Play / Pause Stop Skip
Navigator / Select
8
Press to navigate around the menus. Press the centre Select button to
accept the item/function highlighted in the menu.
USB port
9
USB connector for interfacing to a "Mass Storage Device" or USB
keyboard.
Note: Only USB 2.0 certified products with the USB 2.0 logo on them are
supported by the 640H. Please either consult the manufacturer of the
USB 2.0 product to make sure it is properly certified, or go to
www.usb.org for a list of approved products, before purchase. We
cannot be held responsible for any incompatibility issues.
azur 640H
azur
Music Server
8
7
Record
640H
9
7