Belkin N300 User Manual page 11

GETTING STARTED
When finished installing optional software, click
"Thanks, take me to the dashboard."
Congratulations! You are now at your Router's
dashboard. Your Router is set up and ready to use.
Using the WPS Button
1 . Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router. Often there will be a button for this
purpose in software that came with the device, or a physical
"WPS," "PBC," or "Security" button on the device itself.
2 . Within two minutes, press the WPS button on
your Router and hold for two seconds.
The WPS light (small light above WPS button) will blink blue
while it listens for your Wi-Fi device. Once a connection
is established, the light will turn solid blue and then go
out. If a connection is not established, the light will blink
amber. You may repeat the process to try again.
You can repeat this process for each WPS-enabled
device you'd like to add to your network.
9