Maintenance - Fisher CZ-CZ-70 PRO Quicksilver Operating Manual

Deep search, body mount, target i.d. metal detector
Table of Contents

Advertisement

MAINTENANCE

Your CZ-70 Pro doesn't require a lot of care. It's built with high-
quality materials and it's splashproof and dustproof. But there
are a few things you should do to keep it in peak operating
condition.
1. If you're not going to be using it for a while,
take the batteries out. Acid damage caused by
leaking batteries can be severe.
2. Avoid extreme temperatures. Don't leave it
inside a closed car that's sitting in the sun. Or
even worse, the trunk of a car.
3. If you "scrub" the search coil on the ground,
you'll eventually wear through the bottom of the
coil. Replacement coils are expensive. Instead,
invest in a coil cover; they're cheap.
4. Keep your CZ-70 Pro dry and clean. If you've
been working in or around salt water or dust,
wipe it down with a damp cloth and dry it with a
hair dryer (low or no heat) or a dry cloth.
Remove and clean the lower stem. Keep the
lock nuts free of sand and dirt.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents