LG RC8011A Owners Manual/Install Manual page 16

A
dditional Functions
Time Delay
You can use the Time Delay function to delay the
finishing time of drying cycle.
Maximum Time Delay is 19 hours.
Minimum Time Delay is 3 hours.
1. Turn the dryer on
2. Select cycle
3. Set time delay hour
4. Press Start/Pause button
Favourite
If there is some cycle you would like to make
based on your own drying habit, use "Favourite".
Once favourite cycle is stored, you can repeatedly
use next time before changing the stored setting.
For instance, you turn power on and select Extra
Dry in Cotton Cycle and Low temp and
Anti-Crease in series and then lastly press
"Favourite" until the dryer beeps. It's about 3
seconds. That's all you have to do.
The next time, when turning the dryer on and
pressing "Favourite" you can see the above
options you select displays on the panel.
Anti-Crease
The Anti crease is function to prevent creases
and rumples that are formed when the laundry is
not unloaded promptly at the end of drying cycle.
In this function, the dryer repeatedly runs and
pauses to the cycle end.
If the door is open during Anti-Crease process,
this function is cancelled.
16
Drum Light/Hand Iron
Drum Light (Glass Door)
- During operating cycle, you can see the
drum inside by choosing drum light function.
It helps easy viewing the drying cycle.
Hand Iron (Opaque Door)
This function remains more moist than the
condition for ironing.
Note
This function is available only with
Cotton-Iron and Mixed-Iron cycles.
More Time/Less Time
Press More Time or Less Time until the desired
drying time is set.
Note
These buttons are available only with Timed
Drying, before you push Start/Pause button.