Grundig GBP 6100 2D Manual page 36

INFORMATION
Sound
No sound. Low volume.
Distorted sound.
Cannot hear the desired
audio type.
Cannot switch dubbed lan-
guage or the audio format .
HDMI connections
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
BD-Live and USB connections
Cannot connect network
After network connection,
cannot download file
Succeed in downloading
file, but playback pause.
Pause playing the file in the
USB device
36
ENGLISH
------------------------------------------------------------------------------------------------------------------
Check the connections and the "Digital Output" settings. Check the
input mode on the amplifier/receiver if you have connected one.
Press »AUDIO« to select the audio signal.
The sound effects (Re-master, V. Surround, etc.) will not work when the
bitstream signal is output from the HDMI OUT socket or the
»COAXIAL« socket.
When "BD-Video Secondary Audio" is set to "Off", Dolby Digital
Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as
Dolby Digital or DTS Digital Surround bitstream.
Try to reset the device. To do so, press "
then press this button again.
There are discs for which audio cannot be changed because of how
the disc was created.
When connecting an amplifier/receiver using a coaxial cable or an
HDMI cable, you cannot switch the audio if "Digital Output" is set to
"Bitstream". Set "Digital Output" to "PCM" or connect using audio
cables.
Change "TV Aspect " type to "16:9 Wide".
Check if the disc is a legal copy.
Confirm whether the network connection is ok.
Check if the capacity of Storage is full. if it is full, please clear storage
in the BD-Live menu and reset the device.
Confirm whether the network connection is ok.
Change USB device and then test it.
Confirm the device is USB 2.0. if it is USB 1.1, playing may pause.
Change USB device and then test it.
8 ", wait for 5 seconds and