Adjusting The Osd Settings; Adjusting The Picture Quality - Acer B276HK User Manual

Adjusting the OSD settings

--------------------------------------------------------------------
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD position and general settings. For advanced settings,
please refer to following page:

Adjusting the picture quality

1 Press the MENU key to bring up the OSD.
2 Using the /
the picture element you wish to adjust.
3 Use the /
4 The Picture menu can be used to adjust the Brightness, Contrast, Colour Temp,
6‐axis Saturation, 6‐axis Hue and other image‐related qualities.
5 6‐axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and
cyan 6‐axis Hue: Adjust hue for red, green, blue, yellow, magenta and cyan.
6 Super Sharpness technology can simulate high-resolution images by boosting
the pixel density of the original source. It can make the image more sharper
and clear.
DP mode selection,the default out of DP signal setting
7
can follow the setting message to confirm selection of DP1.2 or DP1.1
is
DP1.2. User
keys, select
keys to adjust the sliding scales.
Picture from the OSD. Then navigate to
EN-15
in B2 6HK
7