Table of Contents
Advertisement
Manually Scan for a Wi-Fi Network
From the Home screen, tap
1.
Tap Scan.
2.
All available Wi-Fi networks are displayed.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 128.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device's Wi-Fi service, including:
Setting your Wi-Fi sleep policy
•
Viewing your device's MAC Address
•
Configuring use of either a DHCP or Static IP
•
128
Settings
Wi-Fi.
➔
➔
To access the Bluetooth Settings menu:
From the Home screen, tap
1.
Tap Advanced.
2.
For more information, refer to "Advanced Wi-Fi Settings" on
page 91.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
From the Home screen, tap
1.
settings.
Tap the ON/OFF slider, located to the right of the Wi-Fi
2.
Direct field, to turn Wi-Fi Direct ON
From the Settings screen, tap Wi-Fi Direct.
3.
Repeat steps 1 - 3 on the other device you want to connect
4.
with. The steps on a different model of phone, may be
different.
On your phone, tap Scan.
5.
The device scans for other Wi-Fi Direct devices.
Settings
Wi-Fi.
➔
➔
Settings
More
➔
➔
.
Advertisement
Table of Contents
