Threading The Machine - Janome 4120QDC Instruction Manual

Janome 4120QDC Sewing Machine Instruction Manual
w
z
c
v
x
b
z
x
c
v b
www.janomeflyer.com
q
w
e

Threading the Machine

Raise the presser foot. Press the needle up/down button
q to raise the thread take-up lever to its highest position.
q Needle up/down button
CAUTION:
Turn OFF the power switch before threading the
machine.
• Threading the machine
z Draw the end of the thread around the upper
thread guide.
x While holding the thread near the spool w, draw
the end of the thread down around the check
spring holder e.
w Spool
e Check spring holder
c Firmly draw the thread up from right to left over the
take-up lever, and down into the take-up lever eye.
v Pass the thread through the lower thread guide.
Slide the thread behind the needle bar thread
guide on the left.
b Thread the needle from front to back, or use the
needle threader.
15
4120QDC Owners Manual/ User Guide