Advertisement
common problems and remedies
1. irregular Darkening Or Dimming
a. Headband has been set unevenly on
both sides of helmet (unequal distances
from the eyes to filter's lens).
b. Reset Headband to reduce difference
in distances to filter, if necessary.
2. auto-Darkening Filter Does
not Darken Or Flickers
a. Front Lens Cover is soiled or
damaged (change the cover).
b. Sensors are soiled (clean surface of the sensors).
c. Welding current is too low (turn
Sensitivity Adjustment Knob to the
"MAX" position, if necessary).
Page 8
For technical questions, please call 1-888-866-5797.
3. Slow response
Operating temperature is too low (do not
use at temperatures below 14° F).
4. poor Vision
a. Front/Inside Lens Cover and/
or Filter soiled (change it).
b. Insufficient ambient light.
c. Shade number is incorrectly set
(reset shade number).
5. Welding Helmet Slips
Headband is not adjusted properly
(must be lowered).
Stop using the Helmet immediately if any of the
mentioned problems cannot be corrected.
Item 61610
Advertisement
