Table of Contents
Advertisement
Lenovo YOGA 730-15IKB
Hardware Maintenance Manual
Figure 7. Removal steps of fan and heat sink assembly (continued)
Remove the screws
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
When installing: Before you attach the fan assembly to the computer, apply
thermal grease, at an amount of 0.2 grams, to part
above. Either too much or too little grease application can cause a thermal
problem due to imperfect contact with a component.
40
. Pull the heat sink in the direction shown by arrow
4
.
5
a
shown in the figure
Advertisement
Table of Contents
