1160 Antenna Assembly And Lcd Cover - Lenovo ideapad 310 Hardware Maintenance Manual

Lenovo ideapad 310-14IAP/ideapad 310-15IAP Hardware Mainte-
nance Manual

1160 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Hard disk drive(HDD) slot compartment cover" on page 34
• "1020 Hard disk drive" on page 35
• "1030 Memory/Mini PCI Express Card slot compartment cover and DIMM"
• "1040 PCI Express Mini Card for wireless LAN/WAN" on page 40
• "1050 Optical drive" on page 42
• "1060 Keyboard bezel" on page 43
• "1070 System board" on page 45
• "1080 Fan assembly and Heat Sink assembly" on page 49
• "1090 LCD unit" on page 51
• "1100 Battery pack" on page 53
• "1110 Speakers, base cover, USB board and ODD transfer board" on page 55
• "1120 LCD front bezel" on page 61
• "1130 LCD panel and LCD cable" on page 62
• "1140 LCD hinges" on page 64
• "1150 Integrated camera" on page 65
Figure 16. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
66
on page 38
a
.
a
a