Lenovo Legion Y530-15ICH Hardware Maintenance Manual
1060 Fan
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1050 Heat sink assembly" on page 38
Figure 6. Removal steps of fan
Unplug the fan connectors in the directions shown by arrows 1. Remove the
screws 2.
Lift the fan in the direction shown by arrows 3.
When installing: Make sure that the connectors are attached firmly.
40
Step
Screw (quantity)
M2.0 x 5.0 mm, Phillips-head, nylok-coated (4)
2
Fan to C-cover
3
Color
Torque
Black
1.0~1.5 kgf*cm
3