Lenovo ideapad 330S Series Hardware Maintenance Manual page 50

Hardware Maintenance Manual
Figure 8. Removal steps of fan and heat sink (continued)
Unplug the fan connector in the direction shown by arrow 3. Remove the
screws 4 and loosen the screws 5.
When installing: Make sure that the connector is attached firmly.
Remove the fan and heat sink in the direction shown by arrow 6 and 7. Be
careful not to damage the connector.
46
Step Screw (quantity)
M2.0 x L3.0 mm, Phillips head (2)
4
M2.0 x L3.0 mm, Phillips head (3)
5
d
d
c
g
f
e
Color
Black
Black