Related service information
This chapter presents the following information:
• "Restoring the factory contents by using OneKey Recovery" on page 23
• "Passwords" on page 24
• "Power management" on page 25
Restoring the factory contents by using Push-button reset
Restore of factory default
The Lenovo ideapad 330-14AST/ideapad 330-14AST D/ideapad 330-14AST
U/ideapad 330E-14AST D/ideapad 330E-14AST U/ideapad 330H-14AST/
ideapad 330L-14AST/ideapad 330E-14AST/ideapad 330R-14AST/ideapad 330-
15AST/ideapad 330-15AST D/ideapad 330-15AST U/ideapad 330E-15AST D/
ideapad 330E-15AST U/ideapad 330H-15AST/ideapad 330L-15AST/ideapad
330E-15AST/ideapad 330R-15AST computers come with pre-installed Push-
button reset. In order to save application files and the initial backed up files of the
system, the hard disk in a Lenovo computer includes a hidden partition when it is
shipped. If you need to restore the system to the point of your first boot up, press
the Novo button and run System Recovery. For details of "Push-button reset",
see the Recovery system in the User Guide.
When you use the recovery discs to boot your computer, the system will enter
the user interface for system recovery automatically. Please follow the prompt
to insert the backup discs to complete the whole recovery process.
Note: This will delete all the new data on the system partition (C drive), which
is not recoverable. Make sure to back up your critical data before you perform this
action.
Note:
The recovery process might take up to 2 hours.
Related service information
23