Setup Utility-Power Management Setup; Setup Utility-Utility Task Actions - HP t505 Troubleshooting Manual

Setup Utility—Power Management Setup
Table 3-6 Setup Utility—Power Management Setup
Option
PWRON After PWR-
Fail
Wake on PME
BIOS Wake up
Day of Week
Time of Day
Setup Utility—Utility Task Actions
Table 3-7 Setup (F10) Utility Task Actions
Heading
Load Factory Defaults
Set Administrator Password
Set User Password
Save & Exit Setup
Exit without Saving
Description
When power is lost and comes back, the option determines what power state the system should
go to. Options are Off, On, and Former-Sts. Default is Former-Sts.
Enable/disable system wake-up capability for events received through the PCI bus. Default is
enabled.
Enable RTC alarm wake-up. Default is disabled.
Select the alarm RTC wake-up day of Sunday through Saturday.
Select the alarm RTC wake-up time of day (hh:mm).
Table
Select Yes or No (Y/N)
Allows you to set, change, and disable the administrator password.
Allows you to set, change, and disable the user password.
NOTE: When the user password is set, it prevents unauthorized access to the user's
setup. User password provides read-only access to Setup options.
Saves data to CMOS, then exit the Setup Utility.
Exit the Setup Utility without saving any changes.
Using the BIOS Settings 25