Changing The 640H Name; Adding Content To Your 640H From Your Mac - Cambridge Audio azur 640H Networking Manual

3.6 Changing the 640H Name

As with a Mac, the 640H needs to have a unique name over the network.
This name by default is "Azur" and is located in Settings/System/System
Info/Unit Name menu of the 640H. It is recommended to change this
name to a simple one word name with no spaces or special characters,
i.e. the room where the 640H is situated (e.g. lounge). If the 640H and
Mac are in the same room, then please use a suitable one word
alternative.
Note: By default, the folder where all your music content is placed is
called "Media". Please see the "Accessing the 640H from a Mac" section
for more information.
10
Note: The set up procedure for OS X 10.4.1 (Tiger) and 10.3.x (Panther)
are the same. For OS X 10.4.2 and above, please turn to "OS X 10.4.2
and Above" section below. The 640H will not network to OS X 10.2 and
below, including OS 9.
3.7 Adding Content to your 640H from your Mac for OS X
10.3.x and 10.4.1 only
Now your 640H and Mac are setup for network communications, the
last step is to get the content of your Mac accessible via the 640H.
1. In the main menu of the 640H, select "Settings" in the left hand
menu:
2. In the right hand menu that appears, select "System":
3. Now select "Content":
4. In the "Content Settings" menu (rescan location), select "Add
Location":