Panasonic Lumix DMC-FS40 Operating Instructions Manual page 91

[Memory Card Error]
●
Card is not of SD standard.
●
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
[Read Error]/[Write Error]
●
Data read has failed.
→ Check whether card has been inserted correctly (→12).
●
Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.
●
Card may possibly be damaged.
●
Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●
If recording stops even when using a card of the recommended speed class (→14), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→39).
●
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
●
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→39)
[Picture is displayed for 16:9 TV]
●
AV cable is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV Aspect] (→38).
●
USB connection cable (supplied) is only connected to camera.
→ Message disappears when cable is also connected to another device.
[Memory card parameter error]
[Please check the card]
[Picture is displayed for 4:3 TV]
- 91 -
Message displays