Mitsubishi HC6500 User Manual page 28

Table of Contents

Advertisement

Menu operation (continued)
3. FEATURE menu
opt.
FE A TURE
ASPECT
PASSWORD
FUNCTION
MENU POSITION
MENU DIMMER
CINEMA MODE
?
VIDEO SIGNAL
SETUP
SCART INPUT
A
LANGUAGE
Ë
RESET ALL
3. FEATURE menu
ITEM
ASPECT
PASSWORD FUNCTION
MENU POSITION
MENU DIMMER
CINEMA MODE
VIDEO SIGNAL
SETUP
SCART INPUT
LANGUAGE
RESET ALL
When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE (2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
When SCART INPUT is set to ON, normal computer signals aren't projected.
Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
Some AV devices equipped with the SCART terminal aren't compatible with this projector.
It may take a little while to carry out RESET ALL in the FEATURE menu.
Downloaded from
www.Manualslib.com
A V MEMO R Y 1
AUTO
DISPLAY
INPUT
1.
OFF
AUTO
AUTO
AUTO
OFF
English
OK
SETTING
FUNCTION
AUTO
Select to change the aspect ratio automatically depending on the input signal.
4:3
Select to project images with an aspect ratio of 4:3.
16:9
Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1
Select to enlarge and project images of CinemaScope size.
ZOOM2
Select to enlarge and project images of Vista size.
STRETCH
Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
(Non-linearly stretched.)
ANAMORPHIC1
This mode is suitable for viewing 2.35:1-size images using the anamorphic lens.
Use the
This mode doesn't support input signals from personal computers.
ANAMORPHIC2
This mode is suitable for viewing 16:9- or 4:3-size images or images input from
personal computers using the anamorphic lens.
Use to enable or cancel the password lock. See page 35 for details.
2 options
Use to change the position of the menu.
ON / OFF
Use to reduce the brightness of the menu.
AUTO
The fi lm mode will be automatically activated when a fi lm source signal is input.
Select AUTO for normal use.
When fl icker occurs on the screen or jaggies on slanting lines are remarkable,
select FILM when a fi lm source signal is input or select VIDEO for other signals.
VIDEO
The fi lm mode will not be activated.
FILM
Fixed to the fi lm mode.
8 options
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn't displayed correctly, select the
desired video format manually.
AUTO
Select AUTO for normal use. When LANGUAGE is not set to
480p or TV60 signal is input, the SETUP changes to 7.5% automatically.
OFF
Select to make black lighter.
3.75% / 7.5%
Select to make black intense.
When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
ON / OFF
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER IN/COMPONENT VIDEO IN terminal.)
10 languages
Use to select the language used in the menus.
OK
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
manuals search engine
or
key to adjust the vertical display position.
EN-28
and 480i,

Advertisement

Table of Contents
loading

Table of Contents