Wall Mounting (Optional) - ViewSonic VA1947a-LED User Manual

Wall Mounting (Optional)

To obtain a wall-mounting kit, contact ViewSonic
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
Step 1. Verify that the power button is turned Off, then disconnect the power cord.
Step 2. Lay the LCD display face down on a towel or blanket.
Step 3. Remove the base and the plastic cover from the back of the stand.
Step 4. Remove the three screws attaching the stand.
Step 5. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm
x 100 mm distance), using screws of correct length.
Step 6. Attach the LCD display to the wall, following the instructions in the wall-mounting
kit.
Step 4. Three screws
attaching the stand
ViewSonic VA1947a-LED/VA1947ma-LED
For use only with UL Listed Wall Mount Bracket
®
or your local dealer. Refer to the
Step 5. Four
VESA screw
holes
Step 3. Plastic cover
7