Table of Contents
Advertisement
40
Operating
Programme Guide (Digital
program only)
The Program Guide contains schedule and program
information for digital programs. They also provide
local over-the-air programs information including
conventional digital programs. Use the Program
Guide to find programs easily and conveniently
and to view schedule and descriptive program
information for the programs.
To Display the Program Guide
Press the GUIDE button on your remote control.
4
To Exit the Program Guide
Press the BACK (1) button to return to the last
program you tuned to.
To navigate through programs on
the Guides
Use W/S/A/D on your remote control to
navigate the guide screen.
You can move faster through programs by scrolling
page-by-page with the CH W/S buttons on the
remote control. Each button stroke scrolls one page
up or down.
To tune to another current channel
Use W/S/A/D to select a current channel then
press ENTER (b). You can watch the channel.
,
Note
For the latest EPG information, go to desired
channel and check the EPG.
To display the Full Information
window
You can view the detail information for the
highlighted program. Press INFO/MENU (m) to
display detail information window. You can select
[More] in EPG information window to display the
more detail information.
To exit the detail information window, select [Close]
then press ENTER (b).
,
Note
y The unit must be connected to the Internet
in order to use the EyeQ EPG menu.
y As broadcasters make last minute changes
to their schedule, the EyeQ EPG may
not be synchronized perfectly with the
broadcasters. So the unit may show the
wrong service.
y The eyeQ EPG may not support all channels.
To change date
When the Program Guide with 8 days is displayed,
you can also change the date of the Program Guide
by pressing the green (G) coloured button then use
A/D to select a date then press ENTER (b).
After setting favorite channels from the CH list, you
can use the yellow (Y) coloured button to toggle
between [All] and [Favorite] channel list.
Timer Recording with Program Guide
You can set a timer record using program guide
with 8 days.
1. Display Program Guide with 8 days.
2. Select a program then press red (R) coloured
button.
The options for timer recording will appear.
Advertisement
Table of Contents
