Inserting/Ejecting the battery and memory card
Inserting/ejecting a memory card (not supplied)
To insert a memory card
1
Slide and open the memory card cover as shown in the
figure.
2
Insert the memory card into the card slot until it softly clicks.
Make sure that the label portion of the card is facing up and the
•
camcorder is placed as shown in the figure.
3
Close the memory card cover.
•
To avoid the data loss, turn off the camcorder by pressing and hold the [Home (
•
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
To eject a memory card
1
Slide and open the memory card cover as shown in the
figure.
2
Gently push the memory card to eject it.
3
Close the memory card cover.
)] button before inserting or ejecting the memory card.
16
Getting Started