Table of Contents
Advertisement
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
1
Raise the image to the desired height angle (Illustration #1), then pull out
the stand feet into position.
2
Use Tilt adjusting wheel (Illustration #2) to fine-tune the display angle.
3
Use Lens shift control rings to move the image to the ideal position. (refer
to page 16)
1
Elevator feet
2
Tilt adjusting wheels
11
Advertisement
Table of Contents
