Fellowes Earglove BlueVoice Quick Reference Manual

Earglove BlueVoice™

Wireless Headset

QUICK REFERENCE GUIDE

To turn the unit on:

Press and hold the on/off switch for 2 seconds. The LED will flash
green every 5 seconds.

To initiate the pairing process:

Simply turn on the headset. Unit remains pairable for 3 minutes.
The LED light will flash green and red.

To force headset into pairing mode:

Slide and hold volume switch up for 7 seconds until LED flashes
green and red. Headset is pairable for 2 minutes.

To answer a call or transfer call from phone to earpiece:

Press the answer/end button once.

To end a call:

Briefly press the answer/end button once or terminate the call from
your cellular phone.

To adjust volume:

To increase the volume, slide volume switch up (+) for each
incremental level. To decrease the volume, slide volume switch
down (-) for each incremental level.

To turn the unit off:

Press and hold the on/off switch for 2 seconds. The LED will flash
green once, then power off.